Skip to content
Biotherm Heat AB – to the home page Contact
+46 (0)921-578 00info@biothermheat.com

Guide 02Wood chip boilers

Heating with wood chips – getting started

Heating with wood chips is one of the cheapest ways to heat. What you need is wood chips, a fuel store, a boiler – and a plan for how the chips get from the store to the boiler.

Reading time approx. 4 minAll guides in the knowledge base

A roofed wood chip store in the forest on a winter evening, with a heap of chips in the light from the roof

Why heat with wood chips?

Wood chips are finely chipped wood from the less valuable parts of the tree – branches, tops and wood that is not good enough for timber or pulp. That makes them one of the cheapest fuels to heat with.

With bought-in chips, heat costs approx. SEK 0.30/kWh. If you have your own forest, it comes to SEK 0.15–0.20. Bioenergy is renewable and counts as carbon-neutral: the carbon dioxide released when the chips burn is absorbed again by the growing forest.

A wood chip boiler does not tie you to one fuel either. The same boiler often burns pellets and other biofuels, so you can burn whatever is cheapest and easiest to get hold of. An electric boiler or a heat pump can only run on electricity.

Bought-in chips
approx. SEK 0.30/kWh
Chips from your own forest
SEK 0.15–0.20/kWh
Our wood chip boilers
20 kW–4.6 MW

Prices as of 2023.

The chips: buy them or make your own.

You buy the chips from a chip supplier or produce them from your own forest – logging residues, thinnings and wood that does not go to the sawmill. We do not supply fuel, but we help you choose a boiler and a fuel store that suit the chips you can get hold of.

The size

The boilers are made for wood chips of size P16S and P31S (G50+). Coarser fractions also work with larger screws, and we plan coarser material together with you.

The moisture content

The PelleTech boilers handle wood chips with up to 40 % moisture content. The wetter the chips, the lower the output and the more fuel is used – so dry chips under cover give more heat.

Read more about chip size and moisture content

The fuel store and the feed system.

In wood chip heating, the fuel takes up space. A 100 kW boiler uses roughly 200 m³ of wood chips a year, so the fuel store is planned together with the boiler – to suit the site, the quality of the chips, how you want to fill it and how much it needs to hold.

A carport-type wood chip store at dusk: a steel frame and roof over a long heap of chips, with the boiler room at the far end
In a carport, the chips stay dry under cover and are filled with a loader.
  • Spring agitator – standard for Multiauto. The spring arms sweep across the floor and carry the chips to the screw. Up to 180 m³.
  • Scraper-floor store – for large volumes. Hydraulic scrapers in the floor push the chips forward. Up to 500 m³.
  • Carport – steel frame and roof, sized to your needs.
  • Heating plant with built-in store – boiler room and fuel store in the same building.

Compare the fuel stores

The boiler, the tank and the site.

A wood chip boiler needs an accumulator tank, roughly 20–30 litres per kW of boiler output, which stores the heat and gives the boiler longer run times. The boiler can stand in an existing boiler room, in a container or in a ready-built heating plant.

Safety is built in: the feed passes through a sealed rotary valve, and a sprinkler – which is required in Sweden – protects against burn-back.

Boiler room, container or heating plant?

Everyday life with wood chip heating.

Today's wood chip boilers are fully automatic. They light themselves, feed in the chips, clean the grate and tubes and discharge the ash. What is left for you is to top up the store and empty the ash – and a major service a couple of times a year, ideally with a service agreement.

With the app, you see the boiler on your phone, and if anything happens you receive an alarm straight away.

The PelleTech Multiauto 100 kW wood chip boiler in a basement boiler room, with the feed from the chip store
A 100 kW Multiauto in a basement boiler room.

How a wood chip boiler is looked after

How to get started.

  1. 01

    Tell us what needs heating

    The buildings, how you heat them today and which chips you can get hold of.

  2. 02

    Heat-load calculation

    We work out the output and the fuel use. The first step is free of charge.

  3. 03

    Quotation and design

    Boiler, fuel store, tank and installation, drawn in 3D for your site.

  4. 04

    Installation and training

    The plant is commissioned, fine-tuned and handed over with training.

View the wood chip boilers

Read next

More guides.

All guides in the knowledge base

Free heat-load calculation

Let's calculate your heating.

Tell us what needs heating and we will calculate it for you – the heat-load calculation is free of charge.

Call +46 (0)921-578 00

info@biothermheat.comVästerås · Luleå

Free heat-load calculation

Let's calculate your heating.

Tell us briefly about your plant and we will get back to you. The first step is free of charge.

We use your details to handle your enquiry. Read our privacy policy.

Cookie settings

Choose what may be loaded and stored.

Read more in the privacy policy