Three ways to give the boiler a home.
The boiler, the feed system, the accumulator tank and the chimney need a place – and the fuel store should be close by. There are three ways to solve it.
| Location | Output | Fits when |
|---|---|---|
| Existing boiler room | 20 kW–4.6 MW | There is a boiler room with space for the boiler and the tank, and the fuel store can be alongside or some distance away. |
| Container | 200 kW–1 MW | The heat is needed quickly, for a limited period or at a site without a boiler room – for example construction heating, to rent or buy. |
| Heating plant | 200 kW–2 MW | The boiler room is to move out into a building of its own, ready when it arrives – ideally with the fuel store under the same roof. |
The outputs refer to our solutions for each location. Container: the construction heating plants; IDRO in a container is engineered project by project.
In the existing boiler room.
If you already have a boiler room, that is often the simplest and cheapest option. The wood chip boiler goes where the old boiler stood, and the fuel store is built alongside or some distance away, with a screw to the boiler. The IDRO industrial boiler can also stand on a platform that is slid into an existing boiler room.
The boiler room is drawn in 3D and 2D, with plumbing and electrical drawings. We do the installation – from the mechanical installation to a turnkey contract with buried pipework, chimney and substations – or your local plumbing and electrical contractors do it to our drawings.

In a container.
A container is delivered ready and lifted into place. IDRO can be delivered with the boiler and the fuel in the same container or in two. As construction and rental heating, wood chip and pellet boilers are available in containers of 200–1,000 kW – with water-based heating or hot air, to rent or buy, the whole plant or parts of it.
The construction heating plants are certified and fire-rated to EI 60, and availability is over 99 %.
In a ready-built heating plant.

A heating plant is the whole boiler room in a building of its own, 200 kW–2 MW, with a PelleTech IDRO or AERO as the boiler. We build it in-house, from a 3D model of your particular site.
It is tested and fine-tuned before delivery and lifted into place by crane. The delivery includes insulated pipes, labelled components, documentation, commissioning and training. The site installation is done by us or by local contractors.
The heating plant can be extended, for example with backup boilers and distribution pumps.
Four versions
- Standard – steel frame and panels, with or without an integrated fuel store.
- Timber-built – colour and shape to suit the site and the architecture.
- Container plant – the boiler room in a standard container, ready to lift into place.
- Biobox ALL INclusive – a built-in fuel store of 17–30 m³, with a hydraulic roof hatch. Connect power, buried pipework and water and start it up. It can be moved.




