Skip to content
Biotherm Heat AB – to the home page Contact
+46 (0)921-578 00info@biothermheat.com

Guide 10Stores and tanks

Silo, scraper-floor store or spring agitator

The fuel store is built to suit the site and the fuel. We manufacture screws and fuel stores ourselves, so the variations are almost endless.

Reading time approx. 2 minAll guides in the knowledge base

Three fuel stores as glass cylinders to scale: a pellet silo, a wood chip store with spring agitator and a scraper-floor store

Three fuel stores to scale.

The store is chosen to suit the layout and space of the site, the quality of the fuel, how you want to fill it and how much it needs to hold.

Three fuel stores as cylinders, to scale by largest volume: a silo, a spring agitator store and the much taller scraper-floor store

11–185m³Silos

180m³Spring agitator

500m³Scraper-floor store

Largest volume per store · height to scale by volume

Spring agitator – the standard for wood chips.

The spring agitator on its own: the round disc with the spring arms and the discharge screw

The spring arms sweep across the floor of the store and carry the wood chips to the discharge screw. The spring agitator is the standard for Multiauto and holds up to 180 m³. It is available from 2 to 6 m in diameter – 3 or 4 m for most boilers – and is filled with wood chips to a height of at least 5 m.

A supporting floor is not needed, as the agitators are stable. But it gives a cleaner store and allows ventilation for drying.

Scraper-floor store – for large volumes.

The scraper-floor store in cross-section: the wood chips lie on the floor, and the scrapers move them forward to the cross screw

In a scraper-floor store, wedge-shaped scrapers driven by hydraulics move the wood chips forward to a cross screw. The scraper-floor store holds up to 500 m³ and suits larger plants with a high fuel demand.

Carport – the chips stay dry under a roof.

A carport-type wood chip store at dusk: a steel frame and roof over a long pile of wood chips

A carport has a steel frame and a roof and is filled with a loader. It is sized to your needs, and the wood chips stay dry under the roof – dry chips give more heat.

Silo for pellets.

Pellet silo in galvanised steel on legs, with the cyclone on the roof and the conical bottom

The silo is made of galvanised steel and holds 11–185 m³. It is filled from a bulk tanker via a pipe, has a cyclone on the roof and a conical bottom, and feeds the boiler by screw.

Pellets can also be stored in small bags or big bags. A vacuum system can fetch pellets from a store some distance away.

More solutions.

  • Heating plant with a built-in store – the boiler room and fuel store in the same building. Biobox ALL INclusive has a built-in store of 17–30 m³.
  • Mobile shredder – all fuel stores can be complemented with our mobile shredder, which turns residues on the farm into fuel.
  • In-house manufacturing – screws and fuel stores are built in our workshop, including for an existing wood chip store.

Read next

More guides.

All guides in the knowledge base

Free heat-load calculation

Let's calculate your heating.

Tell us what needs heating and we will calculate it for you – the heat-load calculation is free of charge.

Call +46 (0)921-578 00

info@biothermheat.comVästerås · Luleå

Free heat-load calculation

Let's calculate your heating.

Tell us briefly about your plant and we will get back to you. The first step is free of charge.

We use your details to handle your enquiry. Read our privacy policy.

Cookie settings

Choose what may be loaded and stored.

Read more in the privacy policy