Skip to content
Biotherm Heat AB – to the home page Contact
+46 (0)921-578 00info@biothermheat.com

Guide 11Stores and tanks

How big an accumulator tank do you need?

Allow 20–30 litres per kW of boiler output. A 100 kW boiler then needs a tank of 2,000–3,000 litres.

Reading time approx. 2 minAll guides in the knowledge base

Cut-away of an accumulator tank with hot water at the top and cooler water at the bottom

The rule of thumb: 20–30 litres per kW.

Multiply the boiler's output in kW by 20 and by 30 to get the tank size in litres.

50 kW
1,000–1,500 l
100 kW
2,000–3,000 l
200 kW
4,000–6,000 l
500 kW
10,000–15,000 l

The rule of thumb is a guide value. The boiler manufacturer also specifies a minimum tank volume, and we work out the exact size for your plant.

Why an accumulator tank?

The boiler charges the tank and stops when it is full. The building then draws its heat from the tank. That means longer run times and fewer starts and stops, and the tank stores the heat and evens out the output when demand shifts during the day.

Without an accumulator tankMany starts and stops

With an accumulator tankLonger run times, fewer starts

Boiler operation over timeBoiler running

Fewer starts mean more even operation. For systems without an accumulator tank, an outdoor sensor and a climate panel for weather compensation are available as accessories for Multiauto.

Tanks from 300 to 20,000 litres.

Insulated accumulator tanks in a row in a tank room, with the pipes to the boiler

The accumulator tanks are for closed heating systems, up to 95 °C. There are thirteen sizes up to 10,000 litres – the standard is 5,000 – and compact tanks up to 20,000 litres for rooms with low ceilings.

If more volume is needed, several tanks are connected together. Two 400 kW boilers can, for example, work with a 10 m³ tank.

Tanks in our range
300–20,000 litres
Standard
5,000 litres
Rule of thumb
20–30 litres per kW

Read next

More guides.

All guides in the knowledge base

Free heat-load calculation

Let's calculate your heating.

Tell us what needs heating and we will calculate it for you – the heat-load calculation is free of charge.

Call +46 (0)921-578 00

info@biothermheat.comVästerås · Luleå

Free heat-load calculation

Let's calculate your heating.

Tell us briefly about your plant and we will get back to you. The first step is free of charge.

We use your details to handle your enquiry. Read our privacy policy.

Cookie settings

Choose what may be loaded and stored.

Read more in the privacy policy