P50
The smaller container, approx. 510 kg.
- Output
- 50 kW
- Air flow
- Up to 4,000 m³/h
- Pellets
- Approx. 11 kg/h
LASCO · Mobile hot air
LATherm pellets
A mobile hot air generator for pellets. Position it, connect the power and the hot air hose – and start.
50kWand150kWTwo sizes
Made by LASCO in Austria
Sold, installed and serviced in Sweden by Biotherm Heat AB
01Mobile
Position. Connect.Start.
The units are designed as container systems, which makes them mobile. With a small pellet silo, heating and drying can be done without much installation work.
01
Position the unit
A mobile container with an hour hopper for pellets.
02
Connect power and hose
16 A, 400 V – and the hot air hose to the building.
03
Start
With a time switch or a thermostat, the unit starts automatically on demand.
02Pellets from the silo
One silo.Five units.
An hour hopper with a suction turbine takes pellets from the silo. With the 5-way distributor, up to five units can be supplied with pellets from the same silo – and there is a separate distributor for a single unit.
- 1The pellet siloSHP Pellet, 2–31 m³.
- 2The 5-way distributorPellets from one silo to up to five units.
- 3The hour hopperWith a suction turbine that takes pellets from the silo.
- 4The unitsP50 or P150, up to five of them.
SHP Pellet silos · hours according to LASCO
| Silo | Volume | P50 | P150 |
|---|---|---|---|
| SHP Pellet 2 | 2 m³ | approx. 125 h | approx. 41 h |
| SHP Pellet 8 | 8 m³ | approx. 495 h | approx. 165 h |
| SHP Pellet 10 | 10 m³ | approx. 630 h | approx. 210 h |
| SHP Pellet 12 | 12 m³ | approx. 750 h | approx. 250 h |
| SHP Pellet 15 | 15 m³ | approx. 945 h | approx. 315 h |
| SHP Pellet 20 | 20 m³ | approx. 1,260 h | approx. 420 h |
| SHP Pellet 25 | 25 m³ | approx. 1,590 h | approx. 530 h |
| SHP Pellet 31 | 31 m³ | approx. 1,965 h | approx. 655 h |
Hours per silo for the P50 and P150 according to LASCO's table for the pellet silos (brochure version C, 2025).
03Control
As simpleas possible.
Time switches or thermostats can be connected to the external start/stop connection. The unit then starts automatically on demand.
- Mains isolator
- On/off switch
- Operating light
- Fault indicator
- Operating notification
- External start/stop
04Applications
Hot airunder the roof.
In hen houses and turkey sheds, the hot air hose hangs from the roof and spreads the heat evenly – a simple, cost-effective way to distribute heat, according to LASCO.
- 1The unitStands outside and blows in hot air.
- 2The pellet siloOptional, for pellets to the unit.
- 3The temperature sensorGives a high level of automation.
- 4The hot air hoseUnder the roof, spreads the heat evenly.
Also for
Greenhouses
For vegetables and flowers.
Production halls and warehouses
Sports and trade fair halls
Event and festival marquees
Short set-up times and affordable fuel.
Construction sites
Drying and heating on the building site.
Drying
With a small pellet silo, without much installation work.
05Versions
Two sizes.
50 and 150 kW. Both are mobile containers with an external pellet store.
P150
The larger container, approx. 1,000 kg.
- Output
- 150 kW
- Air flow
- Up to 8,500 m³/h
- Pellets
- Approx. 33 kg/h
Two models
Technical data.
| Model | P50 | P150 |
|---|---|---|
| Rated heating output | max. 50 kW | max. 150 kW |
| Fuel thermal output | max. 55 kW | max. 165 kW |
| Max. air flow m³/h | up to 4,000 | up to 8,500 |
| Consumption pellets | approx. 11 kg/h | approx. 33 kg/h |
| Pellets | EN 14961-2, category A1 | |
| Combustion | Burner plate over underfeed supply | |
| Ignition | Automatic | |
| Fuel store | External | |
| Power supply | 16 A / 400 V (3P+N+PE) | |
| Flue gas pipe, Ø mm | 180 | 180 |
| Hot air outlet, Ø mm | 400 | 600 |
| Weight without fuel kg | approx. 510 | approx. 1,000 |
| Recording | Hours run meter | |
| Thermostat | Option: external start/stop | |
| Design | Mobile container | |
Data according to LASCO's brochure (version C, 2025), subject to change. LASCO states the air flow in Bm³/h.
Pöndorf · Austria06The manufacturer
LATherm is made by LASCO in Austria.
LASCO Heutechnik GmbH is a family business that has researched, developed and manufactured machines in Austria since 1987 – in forestry, drying, hay and heating technology.
- In Austria since
- 1987
- Production and storage area
- 18,000+ m²
- Fields
- 4
- Years of hay drying in Europe
- 30+
Västerås · LuleåIn Sweden
Biotherm Heat is LASCO's agent in Sweden.
We sell, install and service the LATherm units and help you choose the right unit and the right size – for what needs heating or drying and the fuel you have.
More ways to hot air
For wood chips or permanently installed.
LASCO · Mobile hot air
LATherm wood chips
Fully automatic hot air generators for wood chips in mobile containers – for drying and for heating halls, greenhouses and stables.
- Wood chips
150–750 kWView product
PelleTech · Hot air
AERO
Fully automatic hot air for industrial premises, greenhouses and drying, fired with pellets or wood chips.
- Wood chips
- Pellets
60 kW–8 MW+View product
Free heat-load calculation
Let's calculate your heating.
Tell us what needs heating – the stable, the greenhouse or the marquee – and we will calculate the output and the whole plant.
info@biothermheat.comVästerås · Luleå