Skip to content
Biotherm Heat AB – to the home page Contact
+46 (0)921-578 00info@biothermheat.com

Guide 05Wood chip boilers

Looking after a wood chip boiler

A modern wood chip boiler takes care of most things itself. You top up the fuel and empty the ash – and once or twice a year we carry out a major service.

Reading time approx. 2 minAll guides in the knowledge base

The touch screen of a wood chip plant: the store, the boiler and the accumulator tank with temperatures in one overview

What the boiler does by itself.

Our wood chip boilers are fully automatic, from the fuel that is fed in to the ash that is discharged.

  • Ignites the fuel with a hot-air igniter – no firewood or kindling needed.
  • Feeds the chips from the store, in step with the heat demand.
  • Cleans the grate and the flue tubes during operation. The turbulators move up and down and keep the tubes clean.
  • Adjusts combustion with the lambda sensor, which measures the flue gases.
  • Discharges the ash into the ash box or an ash container.

What you do.

You make sure there is fuel in the store and empty the ash. How often depends on the size of the boiler, the fuel and how cold it is.

The ash screws in the IDRO industrial boiler: two screws under the boiler and an inclined screw that lifts the ash to a container

The ash

In Multiauto, the ash ends up in a removable ash box of 26–38 or 70 litres. The ash container has overfill protection and an alarm.

In the IDRO industrial boiler, an inclined screw can lift the ash all the way out of the boiler room, to a shared container. The AERO hot-air heater has ash containers on wheels, or a central system.

Service once or twice a year.

A major service is carried out a couple of times a year, ideally with a service agreement. We go through the boiler, the feed system and the controls, so that the plant keeps its efficiency and runs reliably all winter.

We carry out service all over Sweden – on our own plants and on other makes.

Two PelleTech Multiauto 100 kW wood chip boilers side by side in a boiler room, with the feed screws from the fuel store
Two 100 kW Multiauto boilers in the same boiler room.

Alarms and remote monitoring.

The boiler has a touchscreen as standard, where you see the output, schedule and fuel type. With the app, for iOS and Android, or the web interface, you can monitor and control the boiler wherever you are, and if anything happens you receive an alarm straight away.

With an internet connection, we can also monitor and control the plant remotely and guide your operating staff.

In the boiler room
The touchscreen
On your phone
The app and alarms
With us
Remote monitoring and remote control

Safety is built in.

The rotary valve in the feed system is fully sealed and protects against burn-back, together with a sprinkler, which is required in Sweden. The lambda sensor keeps combustion right, and the ash container raises an alarm before it is full. Operation is monitored continuously.

Read next

More guides.

All guides in the knowledge base

Free heat-load calculation

Let's calculate your heating.

Tell us what needs heating and we will calculate it for you – the heat-load calculation is free of charge.

Call +46 (0)921-578 00

info@biothermheat.comVästerås · Luleå

Free heat-load calculation

Let's calculate your heating.

Tell us briefly about your plant and we will get back to you. The first step is free of charge.

We use your details to handle your enquiry. Read our privacy policy.

Cookie settings

Choose what may be loaded and stored.

Read more in the privacy policy