Skip to content
Biotherm Heat AB – to the home page Contact
+46 (0)921-578 00info@biothermheat.com

Guide 15More ways to use bioenergy

Hot air from wood chips and pellets

A hot air heater heats the air directly, with no water-based system. The flue gases heat the air in a heat exchanger and never mix with it.

Reading time approx. 2 minAll guides in the knowledge base

The PelleTech AERO hot-air heater in a greenhouse in the evening light, between the rows of plants

Cold air in, warm air out.

The fans blow the air around the steel tubes of the heat exchanger. The flue gases pass inside the tubes and on to the chimney – the air and the flue gases never mix.

The warm air is blown straight into the building or ducted to where the heat is needed. That gives dry heat with no flue gases indoors. The unit can stand inside the building or outside it.

Mobile wood chip hot air unit outside a building, with the hot air hose going in through the wall
The unit stands outside and blows warm air in through a hose.

PelleTech AERO: a hot air heater for wood chips and pellets.

The PelleTech AERO hot air heater on its own: dark grey with a teal stripe, with the feed system and the ash containers

AERO is available from 60 kW to 8 MW and above. The compact AERO 60 and 110 stand on wheels, have their own 203 kg pellet store and burn pellets only.

AERO 150–500 is fed from a separate fuel store and burns pellets or wood chips up to G50, on a moving stepped grate of cast iron with seven levels. Plants above 500 kW are custom-engineered.

With optional automatic compressed-air cleaning, short blasts of compressed air keep the tubes clean. AERO can also be built into a heating plant or a container.

Mobile hot air: LATherm.

The LATherm units are made by LASCO in Austria and sold, installed and serviced in Sweden by us. They are built as mobile containers that can be set up where the heat is needed.

LATherm wood chips · 150–750 kW
H150, H250 and H750, variable 50–100 %. The H750 blows up to 30,000 m³/h.
LATherm pellets · 50 and 150 kW
Connect the power and the hot air hose, and start. Up to five units can take pellets from the same silo.

Where hot air fits.

  • Greenhouses – for vegetables and flowers.
  • Livestock barns – the heat is blown in through ducts or hoses, and the bedding and the air stay drier.
  • Industrial and warehouse buildings – production halls and warehouses, sports and trade fair halls.
  • Drying – for example hay, grain and firewood.
  • Construction sites – drying and heating on the building site.

Read next

More guides.

All guides in the knowledge base

Free heat-load calculation

Let's calculate your heating.

Tell us what needs heating and we will calculate it for you – the heat-load calculation is free of charge.

Call +46 (0)921-578 00

info@biothermheat.comVästerås · Luleå

Free heat-load calculation

Let's calculate your heating.

Tell us briefly about your plant and we will get back to you. The first step is free of charge.

We use your details to handle your enquiry. Read our privacy policy.

Cookie settings

Choose what may be loaded and stored.

Read more in the privacy policy